electro-music.org   Dedicated to experimental electro-acoustic
and electronic music 		 
 Front Page  |  Radio  |  Forum  |  Media  |  Playlists  |  Wiki
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 

 Forum index » Instruments and Equipment » Nord Lead and Nord Wave synths
MoogerFoogers With Nordwave?
Post new topic   Reply to topic Moderators: Wout Blommers
Page 1 of 1 [3 Posts]		 View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Author Message
tomf



Joined: Feb 18, 2009
Posts: 11
Location: uk
PostPosted: Wed Mar 25, 2009 4:53 am    Post subject: MoogerFoogers With Nordwave? Reply with quote  Mark this post and the followings unread
Hi, i was looking at purchasing a couple of moogerfooger controls, mainly the cp251 and the mf 107 freq box.

I was wondering though if they would work with my nord wave.

I see on the back of my nordwave i have a socket for a control pedel and a sustain pedal, soi was thinking it would be used there.

Not too sure about all this tough as i'm quite new to hardware synths

Many thanks

Tom
Back to top
View user's profile Send private message
Wout Blommers



Joined: Sep 07, 2003
Posts: 4529
Location: The Hague - The Netherlands
Audio files: 123
G2 patch files: 12
PostPosted: Thu Mar 26, 2009 2:27 pm    Post subject: Re: MoogerFoogers With Nordwave? Reply with quote  Mark this post and the followings unread
tomf wrote:
... I see on the back of my nordwave i have a socket for a control pedel and a sustain pedal, soi was thinking it would be used there.

Not too sure about all this tough as i'm quite new to hardware synths ...
Not sure? DON'T DO IT!!! The Sustain isn't usefull at all, because it's just a switch!
Those controllers will give a voltage, so when feed into the ControlPedal input they will deliver this voltage. As soon as it reaches more then +5V it will damage your AD converter, the same as soon it falls below 0V... And what will be obtained when you are able to clipp these voltages? The overall volume will go rise and fall in the frequency given by those controllers...

Just let it be...

Wout
Last edited by Wout Blommers on Thu Mar 26, 2009 2:30 pm; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail
tomf



Joined: Feb 18, 2009
Posts: 11
Location: uk
PostPosted: Thu Mar 26, 2009 2:29 pm    Post subject: Reply with quote  Mark this post and the followings unread
totally hear you wout, thankls for the advice, i've been doing some digging and research myself and it turns out it's a no go!

Many thanks for your reply
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic Moderators: Wout Blommers
Page 1 of 1 [3 Posts]		 View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
 Forum index » Instruments and Equipment » Nord Lead and Nord Wave synths
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum

Log in
Username:     Password:      Log me on automatically each visit    


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2026 by electro-music.org