Question NL2X : One different sound for each output A B C D

[markorg]

What is the easiest way to set 4 different sounds for each different output?
I red on manual in order to get sound 1 assigned to output A, sound 2 assigned to output B, sound 3 assigned to output C and finally sound 4 assigned to output D but i'm not able to get it
I've tried on NL2X Keyboard and NL2x rack version without good results

thanks in advance
Marco

[Wout Blommers]

This is done by using the ‘Shift’ function, both on the NL2X and the NR2X.
[Manual page 64 and 64]
Press the Shift and hold these while pressing Slot B knob, which is shifted to Out mode.
Using the up and down arrows set [*.Ab] to [4.Ab] Slot A will go to Output A and Slot B will go to Output B.
Using [Shift+2xSlot B] the LCD reads [*.cd]. Chance this into [4.cd] and Slot C and D will go to these Outputs.

The Keyboard will play all active Slots.
In the Rack one has to set the Midi Channels right.

Wout